Router Design

Translate to English Translate to German Translate to Spanish Translate to French Translate to Russian Translate to Dutch Translate to Italian Translate to Portuguese Translate to Japanese Translate to Korean Translate to Chinese Translate to Greek

Details on Wireless N Router range on G Adapters?

Hi guys, I googled for plenty of time and can't seem to find similar topic with desired details. These questions assumed that G Adapters (and only G) are connected to N Router:

1. Will N Router helps to extend the range? I am aware that the speed wont, but what about range/coverage? Some said it has to be with N adapter, some said it will, and the others were not sure. I have this great answer from jpcloud, confirm/deny?
===========
Yes. The 802.11n standard includes a new antenna configuration over the older g and b standards, meaning that the transmission range and reception sensitivity of the router will be greater than a b or g router. However, while a computer with a g or b network card will have a greater range when connected to an n router than it would when connected to a g or b router, it will still not have the same range as an n card connected to an n router. This is because the n network cards contain the new antenna configuration, which gives them longer range, while the older cards retain the older configuration. Therefore, for an n router and an n card, you have two factors that extend range, while for a g card connected to an n router there is only one factor that extends the range.

Edit: To DaveEC, your answer neglects the fact that N design routers also have increased antenna strength, and so they can detect a weaker g or b signal (lower signal-to-noise ratio) than a g or b router. This does in fact increase the range of a g or b card when connected to the router, but not to the extent of an n card on an n router.
================

2. If #1 answer is yes, will this extended range apply if wireless signal is set to B/G only (not Mixed N/B/G)?

2 questions above aside, but still under same assumption:
3. Will G clients have connection disturbances with mixed N/B/G signal compared to B/G or G signal?

Thanks in advance.

Public Comments

1. G adapters run in G mode, and the router does "G" protocol with them. In effect, you are running in G mode only, and have no benefit from anything related to "N" modes in the router.

If you only have a G adapter, no need to get a N router unless you plan to upgrade your adapters to N in the near future...

While N routers may have slightly better semiconductors (newer), the increase in sensitivity for G or B modes would probably be minor at best. Even then, if there is any interference nearby, a better receiver and antenna will simply increase the interference level as well...
Antennas for some N routers are exactly the same, if it's running on the 2.4Ghz band. Only if you have a 5.8Ghz N router and adapter, would you see improvement in signal strength, antenna gain (usually), and less interference.